Update The Firmware - NETGEAR Arlo Baby User Manual

Update the Firmware

Firmware updates are released automatically to all connected Arlo devices.
Automatic updates happen between 3:00 a.m. and 5:00 a.m. to minimize camera
downtime. If the firmware update is a major one, you might be unable to stream
from your camera until your firmware is updated.
You can wait until the update happens automatically between 3:00 a.m. and 5:00
a.m., or you can update your firmware manually.
Note:
Even when you cannot view your camera live, motion and sound detection still work
and your camera still records based on the currently selected mode.
¾ To update your Arlo Baby firmware manually:
1. Tap the Arlo icon
You can also enter
The Devices page displays.
2. Tap or click Settings > My Devices.
The My Devices page displays.
3. Select the Arlo Baby camera that you want to update.
4. Tap or click Device Info > Firmware > Update.
WARNING: Do not disconnect your camera while the firmware update is in progress.
5. Wait for the firmware update to complete.
The camera's LED blinks amber and blue while the firmware is downloading and
installing. After the firmware is installed, the camera reboots and the LED is off.
When the LED lights again and the pattern stops changing, your camera is available
to stream.
Settings
on your mobile device.
arlo.netgear.com
in the address bar of a browser.
61