Change Motion Sensitivity - NETGEAR Arlo Baby User Manual

The Devices page displays.
2. Tap or click Mode.
A list of cameras displays.
3. Tap or click the Arlo Baby camera.
The Mode page displays.
4. Tap or click a mode to activate it.
The mode that you selected turns on immediately. The mode stays active until
you change it.
When you view the camera feeds, the icons that display at the top of each the
camera feed are based on the currently selected mode. One or both of the
following icons display:
Motion. Motion detection is on.
Sound. Audio detection is on.

Change Motion Sensitivity

You can easily change the sensitivity level for Arlo Baby cameras.
¾ To change the sensitivity level for a camera:
1. Tap the Arlo icon
You can also enter
The Devices page displays.
2. Tap or click Mode.
A list of cameras displays.
3. Tap or click the Arlo Baby camera.
The Mode page displays..
4. Tap or click Edit
The Edit Rule page displays.
Modes, Rules, and Smart Alerts
on your mobile device.
arlo.netgear.com
in the address bar of a browser.
next to the mode.
44