Place Your Camera - NETGEAR Arlo Baby User Manual

Your Arlo Baby camera is set up.

Place Your Camera

You can place your camera on a flat surface or mount it on the wall.
Note:
Do not cover or obstruct the inlet holes for the air quality sensors
¾ To mount the camera on a wall:
1. Place the wall plate and secure it with three screws.
2. Align the wall plate with the holes on the base of the camera and rotate the
base until it snaps into place.
3. Use Arlo Baby's tilt and swivel functions to position the camera so that it
captures the area that you want to monitor.
Set Up Arlo Baby
11