Geofencing Accuracy; Geofencing First In Last Out - NETGEAR Arlo Baby User Manual

Note: The device location displays as either In Zone or Out of Zone.
7. (Optional) To disable geofencing, tap the mobile device again.
The check mark disappears when geofencing disabled.
For more information, see

Geofencing Accuracy

For accuracy, geofencing uses a combination of GPS, cellular data, and WiFi data.
The local environment affects geofencing as follows:
• In urban environments, where the cell towers and WiFi routers are more dense,
geofencing accuracy can reach 100–200 meters.
Note: If you live in a skyscraper, geofencing might not work reliably due to GPS
inaccuracies. Using the Large radius setting might help.
• In more rural areas, where cell towers and WiFi routers are sparse, geofencing
accuracy can reach several hundred meters.
To improve geofencing accuracy, ensure that your mobile device meets these
conditions:
• WiFi is turned on.
• GPS or location services are turned on.

Geofencing First In Last Out

Arlo Baby cameras use the first in, last out principal within the geofencing feature
when more than one family member use geofencing. First in, last out allows you
to come and go without worrying about turning Arlo Baby camera monitoring off
and on. For example, if one family member leaves the house before you, your Arlo
Baby camera can keep monitoring until you leave the house with the baby because
you are still in the house or geofence. After you leave the house and both mobile
devices are outside the geofence, your Arlo Baby camera stops monitoring.
For more information about managing multiple devices, see
Multipe Mobile Devices
Modes, Rules, and Smart Alerts
Set Up Geofencing
on page 49.
50
on page 47.
Geofencing With