NETGEAR Arlo Baby User Manual page 55

Select an Activity Zone for a Rule
¾ To select the activity zone where you want motion to be detected:
1. Tap the Arlo icon
If you are using a computer, enter
browser.
The Cameras page displays.
Mode.
2.
A list of cameras displays.
3. Select the camera.
A list of modes displays.
4. Tap or click Edit
The Edit Rule page displays.
5. Under If the following, tap or click Edit
The Motion Detection page displays.
6. Under Motion Detection Zones, the zone where you want the camera to detect
motion.
If you used a mobile device to specify the settings, your settings are saved.
7. If you used a browser to specify the settings, click Save.
Your settings are saved.
Modes, Rules, and Smart Alerts
on your mobile device.
arlo.netgear.com
next to the mode.
55
in the address bar of a
next to Motion is detected.