Honeywell ST 700 User Manual page 65

On the Device homepage, tap My Views.
1.
Tap Configure and tap Select.
2.
The Configure My Views dialog box appears.
To customize View1 and View2, click the variables by checking the box against desired
3.
variables.
Tap
4.
Once done, tap Options to click Save My Views.
5.
Two custom views are ready with selected variables.
Note: Since a custom view can contain only up to 10 variables each, a warning is
displayed if you have selected more than 10 variables.
To rename the views, perform the following:
Tap Options > Rename View1.
1.
A dialog box appears informing you to enter the name.
Tap Ok.
2.
Tap Option>Save to persist the change
3.
Tap Return to return to My Views page. You would see two options with the names you
4.
gave to the newly created views.
Note: To view the custom views, tap My View 1 > Select.
The My View 1 page appears.
Edit the parameters that are Read / Write and click Send.
For more details on any of the FDC features, refer the MC Tookit User Manual, Document # 34-ST-
25-20 (MCT202) or #34-ST-25-50 (MCT404).
Revision 4.0
or to navigate to previous and next set of variables.
ST 700 Series HART/DE Option User's Manual
Page 51