Cisco TelePresence SX20 Quick Set Administrator's Manual page 8

Cisco TelePresence SX20 Quick Set

Introduction Introduction
New features and improvements in CE8.1
In-room control
With the In-Room Control feature you can customize the
Touch 10 user interface to allow control of peripherals
in your meeting room, for example lights and blinds. You
get a consistent user experience when the video system
and other peripherals in the room are controlled from the
same device.
You can create the user interface extensions for Touch
10 with the In-Room Control Editor. This is an easy to
use drag-and-drop editor that you launch from the video
system's web interface. You can also work offline with a
stand-alone version of the editor. The editor is available
free of charge; no option key is required.
A third-party control system with hardware drivers for the
peripherals, for example Crestron, AMX, Apple HomeKit,
or Android is required to control the peripherals. The
control system connects to the video system's API, listens
for events and executes the programmed actions.
For more information about setting up the In-Room
Control feature, refer to the user guide:
cisco.com/go/in-room-control-docs
User interface update
A new visual design for the Touch 10 and on-screen
display user interfaces is introduced.
D15329.03 SX20 Administrator Guide CE8.2, JUNE 2016.
Configuration
Overscan adjustment from the on-screen
display
If you operate the video system with a TRC6 remote
control, you can now adjust the overscan settings also
from the on-screen display. Previously you had to use the
web interface or API.
You can adjust the overscan settings both in the setup
wizard and by selecting Screen Adjustment in the settings
menu. This way you can adjust the image to fit the screen
in scenarios where parts of the image are not visible.
Most screens have built-in settings to adjust the image,
and these settings should be attempted first.
Change in audio only avatar behavior
Full screen avatar for audio only participants has been
removed. The audio only participants continue to be
visible in the filmstrip during a call.
► http://www.
Intelligent Proximity updates
Sharing a presentation with the Cisco Intelligent Proximity
desktop application renders the laptop's mouse pointer on
screen. This feature requires the latest version of Cisco
Proximity for Desktop together with CE8.1.
When using a video system with the TRC6 remote control,
users can temporarily enable and disable the Intelligent
Proximity services. This was previously only available on
the Touch 10.
Peripherals Maintenance
8
Administrator Guide
System settings
Direct content sharing
You can configure the video system to automatically
share a presentation with the far-end participants
when connecting a presentation source during a call. In
previous software versions, sharing a presentation with
the far-end always required you to manually select Share
with the remote control or Touch controller.
If a presentation source is already connected when the
call starts, you must manually select Share to share the
presentation with the far-end.
For further details, refer to the Video Input Connector [n]
PresentationSelection setting.
www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
Appendices