Cisco TelePresence SX20 Quick Set Administrator's Manual page 22

Cisco TelePresence SX20 Quick Set

Introduction Introduction
How to administer the video system (page 2 of 5)
The web interface of the video system
The web interface is the administration portal for
the video system. You can connect from a computer
and administer the system remotely. It provides full
configuration access and offers tools and mechanisms
for maintenance.
Note: The web interface requires that HTTP or HTTPS
is enabled (refer to NetworkServices > HTTP > Mode
setting).
We recommend that you use the latest release of one
of the major web browsers.
D15329.03 SX20 Administrator Guide CE8.2, JUNE 2016.
Configuration Peripherals
Connect to the video system
Open a web browser and enter the IP address of the
video system in the address bar.
How to find the IP address
1. Select the settings icon (cogwheel) on the
home screen, or in the status bar of the
Touch controller.
2. Select System Information
remote control, or
Information
Sign in
Enter user name and passphrase for the endpoint and
click Sign In.
The system is delivered with a default user
named admin with no passphrase. Leave the
Passphrase field blank when signing in for the
first time.
It is mandatory to set a password for the
admin user.
Maintenance
with the
Settings > System
on the Touch controller.
22
Administrator Guide
System settings
Sign out
Hover the mouse over
the user name and
choose
the drop-down list.
www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
Appendices
Signout from