Cautions And Warnings - Cisco Aironet 340 Series Hardware Installation Manual

Cautions and Warnings

Cautions and Warnings
Note
Caution
Caution
Warning
Warning
Warning
Cisco Aironet Access Point Hardware Installation Guide
2-2
Translated versions of the following safety warnings are provided in Appendix A,
"Translated Safety Warnings."
The FCC, with its action in ET Docket 96-8, has adopted a safety
standard for human exposure to radiated frequency (RF)
electromagnetic energy emitted by FCC-certified equipment. Cisco
Aironet products meet the uncontrolled environmental limits found
in OET-65 and ANSI C95.1, 1991. Proper operation of this radio
device according to the instructions in this publication will result in
user exposure substantially below the FCC recommended limits.
Cisco Aironet power injectors are designed for use with 350 series
Access Points and bridges only. Using the power injector with other
Ethernet-ready devices can damage the equipment.
The operational voltage range for Cisco Aironet 350 Series Access
Points and Bridges is 24 to 60 volts. Higher voltage can damage the
equipment.
Do not operate your wireless network device near unshielded
blasting caps or in an explosive environment unless the device has
been modified to be especially qualified for such use.
Do not work on the system or connect or disconnect cables during
periods of lightning activity.
Read the installation instructions before you connect the system to
its power source.
Chapter 2 Installation
OL-0738-01