Cautions And Warnings - Cisco Aironet 350 Series Hardware Installation Manual

Cautions and Warnings

Cautions and Warnings
Translated versions of the following safety warnings are provided in Appendix A, "Translated Safety
Warnings."
The FCC, with its action in ET Docket 96-8, has adopted a safety standard for human exposure to
Note
radiated frequency (RF) electromagnetic energy emitted by FCC-certified equipment. Cisco Aironet
products meet the uncontrolled environmental limits found in OET-65 and ANSI C95.1, 1991. Proper
operation of this radio device according to the instructions in this publication will result in user exposure
substantially below the FCC recommended limits.
Caution Cisco Aironet power injectors are designed for use with 350 series access points and bridges only. Using
the power injector with other Ethernet-ready devices can damage the equipment.
The operational voltage range for Cisco Aironet 350 series access points and bridges is 24 to 60 volts.
Caution
Higher voltage can damage the equipment.
Cisco Aironet Power Injectors are not rated for operation in a building's environmental air space, such
Caution
as above suspended ceilings.
Do not operate your wireless network device near unshielded blasting caps or in an explosive
Warning
environment unless the device has been modified to be especially qualified for such use.
Do not work on the system or connect or disconnect cables during periods of lightning activity.
Warning
Warning Read the installation instructions before you connect the system to its power source.
This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that
Warning
a fuse or circuit breaker no larger than 120 VAC, 15A U.S. (240 VAC, 10A international) is used on the
phase conductors (all current-carrying conductors).
Hardware Installation Guide for Cisco Aironet 350 Series Access Points Running Cisco IOS Software
2-2
D r a f t 1 - C I S C O C O N F I D E N T I A L
Chapter 2 Installation
OL-7467-01