Touchscreen Re-Calibration - GE IC755CxS06RDx User Manual

Operation
For public disclosure

6.1.3 Touchscreen Re-calibration

The QuickPanel + touchscreen is shipped pre-calibrated. However, if there are any issues
with touchscreen responsiveness, it may need to be re-calibrated.
➢ ➢ To re-calibrate the touchscreen
Open the QuickPanel +
1.
Select the TouchPanel tab.
2.
Select Recalibrate Touch Screen.
3.
Select Recalibrate Touch Sensor.
4.
Note During IC755CxS06RDx or IC755CxW07CDx touchscreen sensor
re-calibration, the user is prompted to activate a switch located in the battery
compartment. This is not applicable to any other display units.
5. Remove the battery cover and press the switch.
Touchscreen Sensor Calibration Switch
Replace the battery cover.
6.
Setup tool.
Switch
Battery
Cover
GFK-2847R 91