Vesa Arm Mounting - GE IC755CxS06RDx User Manual

5.5 VESA Arm Mounting

Refer to the mounting arm
manual for instructions.
68 GFK-2847R
For public disclosure
The QuickPanel + unit can be installed on a commercially available Video Electronics
Standards Association (VESA) MIS-D arm, stand, or apparatus that complies with the
UL1678 standard.
➢ ➢ To VESA mount the QuickPanel
back of the unit (displayed in the following figures).
The mounting holes for IC755CxS06RDx and IC755CxW07CDx attach with M4 screws
that are 6 mm (0.24 in) or less in length.
The mounting holes for IC755CxSxxCDx attach with M4 screws that are 8 mm (0.32 in)
or less in length.
Torque Range for Mounting M4 Screws
Display Unit
IC755CxS06RDx
IC755CxW07CDx
IC755CxSxxCDx
IC755CxW07CDx or IC755CxS06RDx VESA Mounting Holes
IC755CxSxxCDx VESA Mounting Holes
+ unit: use the mounting holes located on the
Torque Range
0.7 to 0.8 Nm (6.2 to 7.1 in-lb)
0.7 to 0.8 Nm (6.2 to 7.1 in-lb)
1.0 to 1.2 Nm (8.9 to 10.6 in-lb)
75 mm
(2.95 in)
100 mm
(3.94 in)
QuickPanel⁺ Operator Interface User Manual