Table of Contents
Advertisement
6 Operation
6.1 Touchscreen Display
From the Setting backlight
brightness drop-down
menu, select a value
between 1 (lowest setting )
and 16 (highest setting ).
Operation
For public disclosure
The QuickPanel
+
Operator Interface features a LED Backlight LCD touchscreen display
with two-point touch technology. The touch technology is based on projected capacitance
that allows finger tracking without pressured contact. It is conducive to smooth scrolling
and multi-touch gesturing capability. Display brightness and backlight operation can be
configured using the QuickPanel
Caution
Note IC755CxS06RDx (6" display) is an Analog Resistive touch display that does not
support two-point touch capability. Single point gestures such as swipe, pan, and
double-tap are supported.
6.1.1 Display Brightness Adjustment
➢ ➢ To adjust the brightness of the display
Open the QuickPanel
+
1.
Backlight Display Properties window.
Set the backlight brightness value.
2.
Tap OK to exit the QuickPanel
3.
4.
Run the
Backup Utility
+
Setup tool available in the program system menu.
Although we recommend the use of the protective
sheet, do not operate the touchscreen with any hard
materials, such as a screwdriver. This could damage
the touchscreen display.
Setup Tool and select the Backlight tab to display the
+
Setup Tool.
to save the settings.
GFK-2847R 89
Hide quick links:
Advertisement
Table of Contents
