Figure - Cisco ONS 15454 DWDM Installation And Operation Manual

NTP-G21 Log into the ONS 15454 GUI
NTP-G21 Log into the ONS 15454 GUI
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1 Complete the
Note
As needed, complete the
Step 2
allow you to manage nodes that are not connected to the login node through a data communications
channel (DCC).
As needed, complete the
Step 3
page
As needed, complete the
Step 4
page
Step 5 As needed, complete the
page
As needed, complete the
Step 6
As needed, complete the
Step 7
on page
Stop. You have completed this procedure.
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
2-24
This procedure logs into CTC, the graphical user interface (GUI) software
used to manage the ONS 15454. This procedure includes optional node
login tasks.
None
NTP-G17 Set Up Computer for CTC, page 2-2
One of the following procedures:
•
•
•
As needed
Onsite or remote
Retrieve or higher
"DLP-G46 Log into CTC" task on page
For information about navigating in CTC, see
"DLP-G48 Create Login Node Groups" task on page
"DLP-G49 Add a Node to the Current Session or Login Group" task on
2-30.
"DLP-G50 Delete a Node from the Current Session or Login Group" task on
2-30.
"DLP-G51 Delete a Node from a Specified Login Node Group" task on
2-31.
"DLP-G52 Change the JRE Version" task on page
"DLP-G53 Configure the CTC Alerts Dialog Box for Automatic Popup" task
2-32.
NTP-G18 Set Up CTC Computer for Local Craft Connection to the
ONS 15454, page 2-9
NTP-G19 Set Up a CTC Computer for a Corporate LAN Connection
to the ONS 15454, page 2-21
NTP-G20 Set Up a Remote Access Connection to the ONS 15454,
page 2-23
2-25.
Appendix A, "CTC Information and Shortcuts."
Chapter 2 Connect the PC and Log into the GUI
2-28. Login node groups
2-31.
September 2005