Makita RP2300FC Technical Information page 7

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-2. Armature, Motor bracket complete (cont.)
DISASSEMBLING
(3) Armature can be removed in the manner A or B shown in Fig. 13. Remove Ball bearing 629DDW from Armature.
Fig. 13
A: Supporting Motor bracket with 2 pcs.
of 1R258, remove Armature with
Arbor press.
Motor bracket
1R258
Armature
(4) Disassemble the Motor bracket as illustrated in Figs. 14 and 15.
Fig. 14
Remove Bearing retainer 60 by unscrewing
M4x14 Countersunk head screw.
M4x14 Countersunk
head screw (3pcs.)
Bearing retainer 60
Fig. 15
Remove Grip cover L by unscrewing
4x12 Tapping screw (2pcs.)
Grip cover L
4x12 Tapping
screw (2pcs.)
B: Strike Motor bracket with Plastic
hammer while gripping Armature.
Armature
Motor bracket
In case of Models RP1800F, RP1801F,
RP2300FC and RP2301F, remove LED
Circuit by removing Bind CT4x12
Tapping screw (2pcs.)
LED circuit
Grip L can be removed by unscrewing
M6x25 Pan head screw.
Grip L
M6x25 Pan head screw
1R269
Remove Ball bearing
629DDW with 1R269.
Bind CT4x12
Tapping screw (2pcs.)
Remove Lock lever by unscrewing
M5x12 Pan head screw.
Separate M10 Set bolt and Torsion
spring 15 from Lock lever.
M10 Set bolt
M5x12 Pan
head screw
P 7/ 27
Ball bearing
629DDW
Remove Ball bearing
6205DDW by striking
Motor bracket with
Plastic hammer.
Ball bearing
6205DDW
Torsion spring 15
Lock lever