W
iring diagram
Fig. D-2F
Noise
suppressor
Grip R
Connecting lead wires (orange, purple)
to be connected to Switch in Grip R
RP1800
Wiring in Motor housing
on Grip R side (Switch side)
Lead Wire
Holder
When putting Lead wires for
connecting to Terminal block,
into this Lead wire holder,
Noise suppressor's thin Lead wire
(white) has to be put under the
following Lead wires.
* Support unit's lead wire (black)
* Thick Connecting lead wire (purple)
for connecting Switch to Terminal
block
Terminal block
Switch lever
P 26/ 27