Makita RP2300FC Technical Information page 4

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-1. Base complete (cont.)
DISASSEMBLING
Fig. 3
4. Loosen Lock lever.
Base can be separated
from Motor section.
(2) Remove Base plate, Lock plate, Compression spring 4 and other component parts.
Refer to Figs. 4 and 5.
Fig. 4
M4x10
Countersunk
head screw
(4pcs.)
6. Remove Base plate by unscrewing
M4x10 Countersunk head screw (4pcs.)
Fig. 5
Remove M6 Hex nut, Flat washer 6
and M10 Screw.
M10 Screw
M6 Hex nut
Flat washer 6
Motor section
Base plate
7. Remove Lock plate by unscrewing M5x10 Set bolt (2pcs.)
Separate Compression spring 4 (2pcs.) from Lock plate.
M6 Flat head screw
Steel ball 7.1
Compression spring 5
M5x14 Thumb screw
Compression spring 7
5. Remove Pole, Silent pole, Compression spring 13
and Compression spring 11.
Pole
Compression
spring 11
M5x10 Set bolt (2pcs.)
The other parts can be removed from Base
complete as illustrated below.
O ring 8
M4x19 Thumb screw
Stopper
O ring 3
P 4/ 27
Silent pole
Compression
spring 13
Compression
spring 4 (2pcs.)
Lock plate
M5x14
Thumb screw
Compression
spring 7