Drive Parameter Setting Tables - Hitachi WJ200-001S Instruction Manual

Ver.3− − − − 120

Drive Parameter Setting Tables

Introduction
This appendix lists the user-programmable parameters for the WJ200 for version2 series inverters and
the default values for European and U.S. product types. The right-most column of the tables is blank, so
you can record values you have changed from the default. This involves just a few parameters for most
applications. This appendix presents the parameters in a format oriented toward the keypad on the
inverter.
Parameter Settings for Keypad Entry
WJ200 for version2 series inverters provide many functions and parameters that can be configured by
the user. We recommend that you record all parameters that have been edited, in order to help in
troubleshooting or recovery from a loss of parameter data.
Inverter model
MFG. No.
M M M M ain Profile Parameters ain Profile Parameters
ain Profile Parameters ain Profile Parameters
NOTE NOTE:. Parameters marked with " " in A column can set even in inverter running and marked with " " NOTE NOTE
cannot set in inverter running. Parameters marked with " " in B column can set even in inverter
running and marked with " " cannot set in inverter running when in the high level access mode, which
means that b031 is set to "10". Parameter marked with "− " in A and B column cannot be set, because that
menu is a monitor function.
Func. Func.
Func. Func.
N N N N ame
Code Code
Code Code
F F F F 00 001 1 1 1 Output frequency setting
00 00
Acceleration time (1)
F F F F 00 00 002 2 2 2 00
Acceleration time (1),
F F F F 2 2 2 2 0 0 0 0 2 2 2 2
2 nd motor
F F F F 00 00 003 3 3 3 00 Deceleration time (1)
F F F F 2 2 2 2 0 0 0 0 3 3 3 3 Deceleration time (1),
2 nd motor
F F F F 00 004 4 4 4 Keypad RUN key routing
00 00
WJ200
" " " " F F F F " " " " Function Function
Function Function
ame ame ame
Standard default target
frequency that determines
constant motor speed, range is
0.0 / start frequency to
maximum frequency (A004)
Standard default acceleration,
range is 0.00 to 3600 sec.
Standard default deceleration,
range is 0.00 to 3600 sec.
Two options; select codes:
00 ... Forward 00 00 00
0 0 0 0 1 1 1 1 ... Reverse
This information is printed
on the specification label
located on the right side of
the inverter
A A A A
D D D D escription escription escription escription
D D D D efaults efaults
efaults efaults
B B B B
Initial data Initial data Initial data Initial data Units Units Units Units
0.00 Hz
10.00 s
10.00 s
10.00 s
10.00 s
00
−