Canon C850 Practical Manual page 135

When Your Printouts Look Like���
The tail end of paper is wrinkled�
← Feeding Direction
Problems with Printouts That Look Like the Following Images
Check the Cause and Remedy Below
Cause
1� Paper tends to wrinkle because the printer is installed
in a hot or humid environment�
2� Paper tends to wrinkle because the paper is thin�
Remedy
• Locate the machine in a room that has consistent
and suitable temperature and humidity�
Keep the paper in the same environment as
that where the machine is located� For the
appropriate temperature and humidity, see the
Installation and Operating Environment Guidelines or the
Specialty Media Handling Guide�
• To improve this situation, adjust the value for <Adjust
Gloss/Fine Black> to match the specific characteristics
of the paper�
→ [Preferences] → [Paper Settings] → [Paper
Press
Type Management Settings] → select the type of
paper you are using that is having this problem →
press [Details/Edit] → [Change] for <Adjust Gloss/Fine
Black> → adjust the value for [Gloss] toward the minus
end�
"Paper Type Management" > "Adjusting the Gloss
and Fine Black" in the User's Guide
imagePRESS C850/C750/C650/C65
133