Canon C850 Practical Manual page 111

NOTE
• If you set [Staple] in the finishing mode, the adjustments in [Finisher Tray A Alignment Adjustment] and [Finisher Tray
B Alignment Adjustment] are disabled�
• Depending on the finisher you are using, the function mentioned above may not be available�
How to Align Thin Paper
The frequency of the misalignment of printouts increases when using "Thin 2 (52 g/m
bond to 16 lb bond))" paper, compared with other types of paper, due to the characteristics of the paper�
Setting [Alignment Priority] for [Finisher Output Priority Settings (Thin)] may improve the situation�
"Adjustment for Image Quality and Finishing (Calibration)" > "Changing the Finisher Output Priority
Settings (Thin)" in the User's Guide
NOTE
• This setting is enabled only when using "Thin 2" paper, and is disabled when using other types of paper,
such as "Plain" or "Thin 1 (64 g/m
• Depending on the finisher you are using, the function mentioned above may not be available�
2 to 79 g/m 2 (17 lb bond to 20 lb bond))" paper�
How to Align Printouts
2 to 63 g/m
imagePRESS C850/C750/C650/C65
2 (14 lb
109