Canon C850 Practical Manual page 126

3
Load paper into the upper drawer of the Multi-drawer Paper Deck-B1�
4
In the same way, load paper into the middle drawer of the Multi-drawer Paper Deck-B1�
• When the middle drawer runs out of paper, the paper source changes to another paper drawer again� Load
paper into the middle drawer in the same way�
NOTE
• You do not need to stop a print job when you refill paper�
• If the machine detects two or more paper drawers that contain the paper when you are using Auto Drawer
Switching, it switches paper sources in order of priority, the highest priority first� In the example described in this
section, the priority order is as follows:
1 Upper drawer
2 Middle drawer
3 Lower drawer
• After you complete a print job, make sure to restore the setting on both the machine and the printer driver to
prevent the setting being applied to the next print job�
• You can use Auto Drawer Switching for various purposes besides those mentioned in this section� For more
information, see the following�
"Settings/Registration" > "Enabling Paper Drawer Auto Selection" in the User's Guide
124 124
imagePRESS C850/C750/C650/C65