Problems With Printouts That Look Like The Following Images - Canon C850 Practical Manual

Problems with Printouts That Look Like
the Following Images
If your printouts consistently appear as shown in the images
below, refer to the cause and remedy described here to
solve the problem� However, please refer to the User's Guide
and confirm the instructions before you adjust the settings,
because adjusting the settings may cause the color balance to
become unstable� If the situation does not improve even after
adjusting the settings, contact your local authorized Canon
dealer�
When Your Printouts Look Like���
Streaks that are perpendicular to the
direction of feed appear in the printout�
← Feeding Direction
Many streaks that are perpendicular to the
direction of feed appear in the printout�
← Feeding Direction
128 128
imagePRESS C850/C750/C650/C65
Check the Cause and Remedy Below
Cause
The intermediate transfer belt is warped�
Remedy
If you have not used your machine for a long period
of time, the intermediate transfer belt may become
warped� If this happens, clean inside the main unit
several times�
→ [Adjustment/Maintenance] →
Press
[Maintenance] → [Clean Inside Main Unit]�
"Maintenance" > "Output Paper Becomes Dirty
(Cleaning Inside of the Main Unit)" in the User's
Guide
Cause
Color displacement has occurred in the printout�
Remedy
Correct the color displacement�
→ [Adjustment/Maintenance] → [Adjust Image
Press
Quality] → [Special Smoothing]�
"Adjustment for Image Quality and Finishing
(Calibration)" > "Special Smoothing" in the User's
Guide