Clean The Headband Pad And Ear Pad; Replace The Srx-Sl Ear Pad - Honeywell SRX-SL User Manual

Clean the Headband Pad and Ear Pad

Leave the headband in place and simply wipe the headband with a soft cloth. If necessary, use a pre-moistened alcohol
wipe to clean and disinfect the unit.

Replace the SRX-SL Ear Pad

The ear pad can be removed by gently pulling at the elastic band (indicated by the arrow below) to stretch enough to slip
the ear pad from the lip of the eModule.
To replace the ear pad:
1. Locate the notch on the ledge of the eModule.
Notch
Ledge
2. Slip the elastic band over the ledge at the notch.
3. Rotate the earpad while holding the eModule stationary. Apply mild pressure during the rotation process.
4. After a complete 360° rotation, the earpad should cover the ledge. If the ledge is not completely covered, continue to
rotate the earpad with mild downward pressure until the entire ledge is covered.
Contact Customer Support (see page 3-1) for replacement Honeywell ear pads.
2 - 7