Honeywell SRX-SL User Manual page 13

The pairing steps below are for Honeywell devices. Other Android devices will be similar. Steps vary slightly by OS version.
Dolphin 75e / Dolphin CT50 powered by Android 4.4 KitKat
1. Make sure the SRX-SL headset is on, is in pairing mode (the LED is solid green) and is in range.
2. Touch All Apps
3. Touch Bluetooth.
4. Touch Search for Devices to refresh the scan started when the Bluetooth radio was first activated.
5. Touch on the name of the device you want to connect to on AVAILABLE DEVICES list.
6. The Bluetooth radio attempts to connect with the headset.
7. When the devices are paired successfully, the device name is displayed under the PAIRED DEVICES heading on the
Bluetooth settings screen.
8. When completed, the headset's LED will flash blue to indicate it has paired successfully.
Dolphin 75e / Dolphin CT50 powered by Android 6.0 Marshmallow
1. Make sure the SRX-SL headset is on, is in pairing mode (the LED is solid green) and is in range.
2. Touch All Apps
3. Verify the Bluetooth radio is turned On
4. If the headset does not appear in the list, make sure the headset is turned on and discoverable.
and then select Refresh.
Touch
5. Touch on the name of the device you want to connect to on Available devices list.
> Settings . Verify the Bluetooth radio is activated
> Settings > Bluetooth.
.
.
2 - 3