Row Creation In Historycontroltable; Get Requests And Getnext Requests; Row Deletion In Historycontrol Table; Ethernet History Rmon Group - Cisco ONS 15600 Series Reference Manual

Multiservice switching platform (mssp)
Hide thumbs Also See for ONS 15600 Series:
Table of Contents

Advertisement

13.8.5 History Control RMON Group
The historyControlTable maximum row size is determined by multiplying the number of ports on a card
by the number of sampling periods. For example, an ONS 15600 E100 card contains 24 ports, which
multiplied by periods allows 96 rows in the table. An E1000 card contains 14 ports, which multiplied by
four periods allows 56 table rows.
Table 13-6
Sampling Periods
(historyControlValue Variable)
15 minutes
24 hours
1 minute
60 minutes

13.8.5.2 Row Creation in historyControlTable

The etherStats table and historyControl table are automatically created when the Ethernet facility is
created. History size is based upon the default history bucket located in

13.8.5.3 Get Requests and GetNext Requests

These PDUs are not restricted.

13.8.5.4 Row Deletion in historyControl Table

To delete a row from the table, the SetRequest PDU should contain a historyControlStatus value of 4
(invalid). A deleted row can be recreated.

13.8.5.5 Ethernet History RMON Group

The ONS 15600 implements the etherHistoryTable as defined in RFC 2819. The group is created within
the bounds of the historyControlTable and does not deviate from the RFC in its design.

13.8.5.6 64-Bit etherHistoryHighCapacityTable

64-bit Ethernet history for the HC-RMON-MIB is implemented in the etherHistoryHighCapacityTable,
which is an extension of the etherHistoryTable. The etherHistoryHighCapacityTable adds four columns
for 64-bit performance monitoring data. These two tables have a one-to-one relationship. Adding or
deleting a row in one table will effect the same change in the other.

13.8.5.7 Alarm RMON Group

The Alarm group consists of the alarmTable, which periodically compares sampled values with
configured thresholds and raises an event if a threshold is crossed. This group requires the
implementation of the event group, which follows this section.
Cisco ONS 15600 Reference Manual, R7.0
13-14
RMON History Control Periods and History Categories
Total Values, or Buckets
(historyControl Variable)
32
7
60
24
Chapter 13
SNMP
Table
13-6.

Advertisement

Table of Contents
loading

Table of Contents