During Ethernet offloading, you can use the micro USB port for AC charging and you can use
the USB type A port to jump boost a device or to connect a USB device.
Figure 6. Ethernet offloading with AC charging and a USB storage device
If you want to use a tethered connection and offload, use WiFi offloading. You cannot use an
Ethernet connection and a tethered connection at the same time.
Figure 7. Tethered access is not supported during Ethernet offloading
Turn On Data Offloading From the NETGEAR Mobile App
To turn on data offloading:
1.
Launch the NETGEAR Mobile app on your smartphone.
2.
Swipe down.
The dashboard displays.
3.
Tap
Offloading.
The Offloading page displays.
4.
Select WiFi.
The Offloading page displays a list of WiFi networks in your area.
5.
To connect to a network on the list, do the following:
a. Tap a WiFi network.
b. When prompted, enter the password for the WiFi network and tap CONNECT.
6.
To join another WiFi network that is not in the list, do the following:
a. Tap Join Network.
b. When prompted, type the network name and the password.
Nighthawk M1 4GX Gigabit LTE Mobile Router
Manage Your Internet Connection
30