Table of Contents
Advertisement
The mobile router rear panel includes the following ports:
•
USB type A port. Connect a USB storage device or charge a smartphone.
For information about USB storage devices, see
page 55.
For information about charging a smartphone, see
Another Device
on page 24.
•
USB type C port. Connect the USB type-C cable that came in the package to recharge
the battery or for a tethered connection to a computer.
For more information about recharging the battery, see
Socket
on page 22 and
A tethered connection to a computer lets you access the mobile router from a web
browser without a WiFi connection. See
•
Ethernet port. You can connect an Ethernet device to this port and you can offload your
mobile Internet data. The Ethernet connection speed is about 500 Mbps.
When you are using an Ethernet connection, you can use the USB type C cable and the
AC adapter to recharge the mobile router battery.
Note:
You cannot use an Ethernet connection and use a tethered
connection to access the mobile router at the same time.
For information about offloading data, see
page 29.
For information about how to use a charge-only tethered connection, see
Type C Cable to Charge Only
Optional Accessories
The following optional accessories are also supported:
•
Optional micro SD card (sold separately)
•
Optional antennas (sold separately)
For more information, visit netgear.com/telstraaccessories.
Nighthawk M1 4GX Gigabit LTE Mobile Router
Recharge the Battery From a Computer USB Port
Tethered Connection
Offload Your Mobile Internet Connection
on page 23
Get Started
10
Connect a USB Storage Device
Use the Mobile Router to Jump Boost
Recharge the Battery From a Wall
on page 16.
on
on page 23.
on
Use the USB
Advertisement
Table of Contents
