Table of Contents
Advertisement
Turn Off USB Tethering From a Web Browser
To turn off tethering:
1.
From a computer that is connected to your network, launch a web browser.
2.
Enter http://m.home or http://192.168.1.1.
A login page displays.
3.
Enter the administrator login password.
The password is case-sensitive.
The dashboard displays.
4.
Select Settings > Setup > Router Setup.
The Router Setup page displays.
5.
In the Use USB port for section, select Charge only.
6.
Click the Apply button.
Your settings are saved.
Manage Website Filters
You can set up a filter to block or allow access to websites that you specify. You can also set
up a list of devices that are unrestricted. The website filtering does not apply to unrestricted
devices.
To set up a website filter:
1.
From a computer that is connected to your network, launch a web browser.
2.
Enter http://m.home or http://192.168.1.1.
A login page displays.
3.
Enter the administrator login password.
The password is case-sensitive.
The dashboard displays.
4.
Select Settings > Security > Website Filters.
The Website Filters page displays.
5.
Select the Enable check box.
6.
In the Filter Type menu, select Block List or Allow List.
Depending on your selection, a Blocked Websites list or an Allowed Websites list
displays.
7.
To add a website to the list, click the ADD button and enter the website.
Nighthawk M1 4GX Gigabit LTE Mobile Router
Control Internet Access
39
Advertisement
Table of Contents
