Install The Sim Card And The Battery; Download The Netgear Mobile App - NETGEAR MR1100 User Manual

Install the SIM Card and the Battery

To obtain an activated micro SIM (3FF format) card, contact Telstra.

To install the SIM card and the battery:
1. Make sure that power to the mobile router is off.
2. Remove the cover on the bottom of the mobile router.
Place your thumbs on the arrows on the cover and press down while sliding the cover up.
3. Carefully slide the micro SIM card into the slot.
4. Align the battery connectors and insert the battery.
5. If you purchased a micro SD card, insert the card into the micro SD slot.
6. Replace the mobile router cover.

Download the NETGEAR Mobile App

The NETGEAR Mobile app lets you set up the mobile router. After initial setup, you can use
the app to view or change the mobile router settings. You can also use it to enable Arlo
support, play and share media, and enable the travel router feature.

To download the NETGEAR Mobile app:
1. Connect your mobile device to the Internet.
2. Open a web browser.
3. Visit http://netgear.com/mobileapp.
4. Download the NETGEAR Mobile app.
Nighthawk M1 4GX Gigabit LTE Mobile Router
Micro SD card
SIM card
Get Started
11