Table of Contents
Advertisement
Note:
Your computer (and
other devices) can connect
to the hotspot wirelessly.
Use the USB cable mainly to
recharge the battery or
charge another device.
(You can also connect to the
Internet with the hotspot
tethered to the laptop with
the USB cable. See
Tethered
mode
on page 16.)
Rev 1 Oct.13
Install the SIM
Depending on your service provider, the microSIM card may already be inserted. If you
need to insert it:
1. Remove the SIM slot cover.
2. Insert the microSIM card as shown.
3. Close the slot cover.
Connect to the Internet
To connect to the Internet:
1. Turn on the hotspot.
Press and hold the power button for a few seconds. Once powered up, the hotspot
automatically searches for and connects to your network provider's mobile
broadband network.
2. Connect your computer or other device to your Wi-Fi network.
a.
Check that your device has Wi-Fi enabled, and search for available Wi-Fi
networks.
b. Select the Wi-Fi name displayed on the hotspot LCD screen, and connect to it.
c.
When prompted, enter your Wi-Fi password, as it appears on the hotspot's
LCD screen.
3. Launch your browser to surf the Internet. (The first time you use the hotspot, you
will have to activate it with BigPond. Follow the instructions in the Quick Start
Guide included with your device.)
Get Started
15
Advertisement
Table of Contents
