Basic And Standard Display Operations; Editing A Numeric Value; Selecting A New Setting From A List Of Choices - Honeywell ST 700 User Manual

5.4

Basic and Standard Display Operations

5.4.1 Editing a Numeric value

Editing of a numeric value is a digit-by-digit process, starting with the left-most digit.

1. Press to begin the edit process:

The Basic and Standard Display will display the current value of the item on the lower
line, left justified.

Basic Display: Press the  or  buttons to select the relevant digit, and then press
advance to the next digit to the right.

Standard Display: Press the  button to select the relevant digit, and then press
button simultaneously) to advance to the next digit on the right.
2. Basic and Simply Displays: After the last digit has been entered, press  one more time to
write the new value to the transmitter.

5.4.2 Selecting a new setting from a list of choices

Use the procedure described below to select a new setting for parameters that present a list of choices
(e.g. PV Display, Pressure Units, etc.).

1. Press to begin the edit process.
a. The Basic Display will show the current setting of the item on the lower line, left
justified.
2. Press the  or  buttons to scroll through the list of choices.

Press to make your selection. The new selection will be stored in the transmitter and will
be displayed on the lower line, right justified.
Revision 8.0
ST 700 SmartLine Pressure Transmitters User's Manual

to

(both
Page 37