Two-Button Operation; The Standard Display Menu; Figure 18 - St 700 Standard Transmitter - Two-Button Option - Honeywell ST 700 User Manual

5.3

Two-Button Operation

The ST 700 Standrad transmitter has an optional two-button interface that provides a user interface
and operation capability without opening the transmitter.
button option and the labels for the buttons.
Figure 18

5.3.1 The Standard Display Menu

The ST 700 Standard Display Menu is implemented as one long single-level menu and will "wrap
around" when it reaches the end of the menu. Operation is as follows:
1. Select <Exit Menu> and press
2. Use the  buttons to scroll through the list of menu items.
3. Press the  button to select an item for data entry or activation. When an item is selected for
data entry or activation, the cursor will jump to the lower line of the LCD to allow editing of
the value. No action is taken against a menu item until the user presses the
4. If you want to abort a data entry operation, simply refrain from pushing any buttons for 10
seconds; the data entry operation will time out and the original value of the selected item will
be preserved.
5. If you want to abort a menu operation, simply refrain from pushing any buttons for 60
seconds; the menu operation will time out and the exit from menu & it will show PV value.
Note: The abort option is not available for Loop test parameter.
Page 32
–
ST 700 Standard Transmitter -

to exit the Menu.
ST 700 SmartLine Pressure Transmitters User's Manual
Figure 18 shows the location of the two-
Two-Button Option

button.
Revision 8.0