Flow Breakpoint
##. #%
Tag ID
Device ID
Unique for each device
PV Units
Units of transmitted PV
Install Date
DD MM YYYY
Display
Firmware
Electronics
Meterbody
HART
Protocol
DE
Model Key
<Exit Menu>
Page 30
ST 700 SmartLine Pressure Transmitters User's Manual
Enter the low flow cutoff point when
Single Breakpt is selected. Range: 0
to 25.0 %Flow.
Enter Tag ID name up to 8
characters long.
= any Alphanumeric value
This selection allows the user to
enter the date a transmitter is
installed.
The Install Date is entered in
sequence of Day, Month, and Year,
followed by the new date and the
prompt Write Date to confirm the
entry.
CAUTION: The Install Date can only
be written once in the life of the
Transmitter. You cannot erase or
overwrite the Install Date once it has
been written.
Menu item shows the current
Firmware versions of the Display,
Electronics Module and the Meter
body
Menu item shows the
communications protocol
Identifies the type and range of the
transmitter
Press to
enter menu
selection
and to
select
Alphanumeric
to enter
and shift to
next
character to
the right.
Read Only
Press to
enter menu
selection
and to
select
number
to enter
and shift to
next digit to
the right.
Read Only
after entered
Read Only
Parameter
Read Only
Parameter
Revision 8.0