Figure 1
Figure 1
1
1
2
3
Unpacking the Power Injector
The following items are shipped with the power injector:
•
•
•
If any item is missing or damaged, contact your Cisco representative or reseller.
To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord. Statement 1023
Warning
You must use shielded outdoor rated Ethernet cable with this device.
Note
identifies the power injector's connections.
Power Injector Connections
Mounting tabs
AP POWER LED
FAULT LED
A power injector
An AC line cord
This guide
Cisco Aironet Series Power Injector AIR-PWRINJ1500-2= Installation Instructions
2
3
4
5
4
AC POWER LED
5
TO AP—RJ-45 connection to access point
(10/100/1000Base-T)
6
TO SWITCH—RJ-45 connection to switch
(10/100/1000Base-T)
Unpacking the Power Injector
6
1
5