Technical Specifications; Regulatory Information - Cisco AIR-PWRINJ1500-2 Installation Instructions Manual

Technical Specifications

Technical Specifications
Input voltage
Output voltage
Voltage range tolerance 54 VDC to 57 VDC
Maximum current
No load current
Output 1 voltage and
current
Output 2 voltage and
current
Operating temperature
Storage temperature
Operating humidity
Storage humidity
Length
Width
Height

Regulatory Information

The following information is for FCC compliance of Class B devices:
The equipment described in this manual generates and may radiate radio-frequency energy. If it is not
installed in accordance with Cisco's installation instructions, it may cause interference with radio and
television reception. This equipment has been tested and found to comply with the limits for a Class B
digital device in accordance with the specifications in part 15 of the FCC rules. These specifications are
designed to provide reasonable protection against such interference in a residential installation.
However, there is no guarantee that interference will not occur in a particular installation.
Modifying the equipment without Cisco's written authorization may result in the equipment no longer
complying with FCC requirements for Class A or Class B digital devices. In that event, your right to use
the equipment may be limited by FCC regulations, and you may be required to correct any interference
to radio or television communications at your own expense.
Cisco Aironet Series Power Injector AIR-PWRINJ1500-2= Installation Instructions
2
100 to 240 VAC
56.0 VDC
1.43 A
15 mA
56VDC@0.71A
Pin 3, 6—+56VDC
Pin 1, 2—Return
56VDC@0.71A
Pin 4, 5—+56VDC
Pin 7, 8—Return
-40 to 131 degrees F
(-40 to 55 degrees C)
-58 to 185 degrees F
(-50 to 85 degrees C)
10% to 90%
non-condensing
10% to 95%
non-condensing
8 in.(20.3 cm)
4.25 in.(10.8 cm)
2.5 in. (6.3 cm)