Table 1
Pin Number
7
8
Shield
Note
Table 2
Pin Number
1
2
3
6
4
5
7
8
Shield
The power injector output connector (TO AP) only supplies 56 VDC power when the Ethernet cable is
Note
connected to the PoE-in connector.
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a
service request, and gathering additional information, see What's New in Cisco Product Documentation
at: http://www.cisco.com/c/en/us/td/docs/general/whatsnew/whatsnew.html.
Subscribe to What's New in Cisco Product Documentation, which lists all new and revised
Cisco technical documentation as an RSS feed and delivers content directly to your desktop using a
reader application. The RSS feeds are a free service.
Power Injector Input Connector (TO SWITCH) Pinouts (continued)
Signal Name
Ethernet signal pair (1000Base-T)
Chassis ground
Table 2
describes the RJ-45 pin signals for the power injector output connector (TO AP).
Power Injector Output Connector (TO AP) Pinouts
Signal Name
Ethernet signal pair (10/100/1000Base-T) and 56 VDC return
Ethernet signal pair (10/100/1000Base-T) and 56 VDC (+)
Ethernet signal pair (1000Base-T) and 56 VDC (+)
Ethernet signal pair (1000Base-T) and 56 VDC return
Chassis ground
Cisco Aironet Series Power Injector AIR-PWRINJ1500-2= Installation Instructions
Obtaining Documentation and Submitting a Service Request
9