Cisco SCH-VDS-I Reference Manual page 28

Smart+connected video door station
Table of Contents

Advertisement

Installing the Cisco Video Door Station
Two (2) types of Wi-Fi antenna kits are available for purchase: 26cm (dipole, best performance) or 3m
(when you need to install the wire further away from the Cisco Video Door Station for a better Wi-Fi
signal).
Refer to the following topics for more information:
Wi-Fi Antenna Pre-Requisites
Before you install the antenna:
Installing the 26cm Antenna Kit
Figure 15
Cisco Smart+Connected Video Door Station Reference Guide
28
26cm Antenna Kit—(sold separately). Recommended for walls that do not have thick concrete
or metal. See
Figure
15.
3 meter Antenna Kit—(sold separately). Extend the range when walls have thick concrete or
metal. See
Figure
18.
Wi-Fi Antenna Pre-Requisites, page 28
Installing the 26cm Antenna Kit, page 28
Installing the 3 Meter Antenna Kit, page 31
Make sure the Cisco Video Door Station is assembled.
Make sure the Cisco Video Door Station Back Box is installed in the wall. See
Back Box" section on page 11
26cm Antenna Kit
for details.
the"Installing the
OL-27367-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sch-vds-eSch-vds-bb

Table of Contents