Attach The Cisco Video Door Station - Cisco SCH-VDS-I Reference Manual

Installing the Cisco Video Door Station
Attach the antenna (3m or 26cm) to the Video Door Station. See the
Step 3
section on page 27
Step 4 Run the antenna wire through the Back Box hole (see
Back Box.
Step 5 Align the antenna vertically to the wall outside the Back Box (26cm antenna) or run the antenna through
the wall (3m antenna).
Figure 14 Wi-Fi with PoE: External Video Door Station (Left) and Internal Video Door Station (Right)
1
Antenna
2
Ethernet and PoE connection

Attach the Cisco Video Door Station

After you install the Back Box, all wiring, cables, and antennas, carefully insert the Cisco Video Door
Station into the Back Box and the wall.
Procedure
Align the Video Door Station's top and bottom screw holes on the faceplate with the screw holes on the
Step 1
Back Box.
Use the screws provided to attach the Video Door Station to the Back Box.
Step 2
Cisco Smart+Connected Video Door Station Reference Guide
26
for details.
"Installing the Wi-Fi Antennas"
Figure 17). Ensure that the wire doesn't touch the
OL-27367-01