Installing The Cisco Video Door Station; Inside Panel Description - Cisco SCH-VDS-I Reference Manual

Installing the Cisco Video Door Station

Installing the Cisco Video Door Station
Refer to the following topics for information and instructions to install the Cisco Smart+Connected
Video Door Station.
•
•
•
•
•
•
•

Inside Panel Description

Figure 8 Inside Panel: External Video Door Station (Left) and Internal Video Door Station (Right)
1 AC connection-Used to connect the wires for AC power.
2
Contacts/Relays-Used to connect the wires for third-party devices.
Note Use the contacts and relays for nonsecure devices only. For example, don't attach security gate wires to this
terminal block.
Cisco Smart+Connected Video Door Station Reference Guide
18
Inside Panel Description, page 18
Connecting the Power and Network Cables, page 19
Attach the Cisco Video Door Station, page 26
Configure the Cisco Video Door Station, page 27
Reset/Factory Restore the Cisco Video Door Station, page 27
Installing the Wi-Fi Antennas, page 27
Contact and Relay Connections, page 32
OL-27367-01