Table of Contents
Advertisement
3
Reset Button—Used to reset or factory restore the Cisco Video Door Station. Press the vertical bar to reset.
4
DC connection—Used to connect the wires for DC power.
5
Ethernet connection—Supports PoE.
Connecting the Power and Network Cables
Choose one of the following options to connect the Cisco Video Door Station's wiring:
Table 6
Option
Ethernet with PoE
(recommended)
Ethernet with AC
Ethernet with DC
Wi-Fi with AC
Wi-Fi with DC
Wi-Fi with PoE
Option 1 (Recommended): Ethernet Connection with a PoE Injector or Switch
In this option, electrical current is injected into the Ethernet cable by a PoE Injector. This method
provides the Cisco Video Door Station with both power and a network connection.
Procedure
Plug the Ethernet cable into the Cisco Video Door Station
Step 1
(Optional) Connect an earth ground:
Step 2
a.
b.
Note
OL-27367-01
Power and Network Connection Options
More Information
Option 1 (Recommended): Ethernet Connection with a PoE Injector or
Switch, page 19
Option 2: Ethernet Connection with AC Power, page 20
Option 3: Ethernet Connection with DC Power, page 21
Option 4: Wi-Fi Connection with AC Power, page 22
Option 5: Wi-Fi Connection with DC Power, page 24
Option 6: Wi-Fi Connection with PoE, page 25
Connect a ground wire from the Video Door Station to one of the back box lugs.
Connect a second earth-ground or house-ground wire from the second back box lug to the home.
See the
"Grounding Requirements" section on page 9
(Figure
9).
for more information.
Cisco Smart+Connected Video Door Station Reference Guide
Installing the Cisco Video Door Station
19
Advertisement
Table of Contents
