Back Box Requirements; Back Box Network And Power Considerations - Cisco SCH-VDS-I Reference Manual

Installing the Back Box

Back Box Requirements

Table 5 Back Box Requirements
Requirement
Mount the Back Box in an appropriate location. See the
Tools to install the Back Box, such as a tape measure, pencil, hammer or screwdriver (depending on whether
you are using screws or nails).
Nails or screws (4 to 6).
Antenna Kits (optional, sold separately). See the
Wi-Fi Antennas" section on page

Back Box Network and Power Considerations

This device uses an Ethernet or Wi-Fi network connection, and can be powered using PoE, AC, or DC.
We recommend using Ethernet rather than Wi-Fi for the best network connectivity. See
Note
the Power and Network Connection Options" section on page 7
Cisco Smart+Connected Video Door Station Reference Guide
12
"Mounting Tips" section on page
"Accessories" section on page 4
27.
9.
and the "Installing the
for wiring installation details.
Requirement
Complete?
( )
"Understanding
OL-27367-01