Table of Contents
Advertisement
Cleaning the Touchscreen and Docking Station
Power Off the Device
To power off the Cisco Portable Tablet, press and hold the Power button for at least five (5) seconds, and
then wait a few more seconds for the device to turn off.
Power Management Best Practices
Read the following guidelines for Cisco Portable Tablet use in and out of the docking station or when
intercom is used.
•
•
•
•
Here are some other examples and how much battery power is consumed in these settings:
•
•
Cleaning the Touchscreen and Docking Station
Procedure
Unplug the power jack from the docking station.
Step 1
Use a soft, damp cloth to wipe off the surface.
Step 2
Troubleshooting
If you experience operational problems with the Cisco Portable Tablet, read the following sections for
system troubleshooting. If problems persist, please contact your Cisco dealer or your Cisco
representative.
Battery Operation Problems
If the battery is low...
•
Cisco Smart+Connected Portable Tablet Reference Guide
16
The Power Management settings do not apply when the Cisco Portable Tablet is in its docking
station.
The Power Management settings do apply when the Cisco Portable Tablet is out of the docking
station. Go to More > Settings > Power Management.
If the Cisco Portable Tablet Suspend option is enabled, intercom connections will fail when the
device is in suspend mode. Disable the Suspend option if necessary (set it to Never).
The default settings are Never for Turn Backlight Off and After 3 mins for Suspend. Typically, the
battery will last for about 13 hours with these settings.
If Turn Backlight Off is set to 3 mins and Suspend is set to Never, the battery will last half as long
as the default settings due to increased battery use.
If Turn Backlight Off is off and Suspend is off, the battery will last about a quarter as long as the
default settings due to increased battery use.
Recharge the battery as soon as possible.
OL-27364-01
Advertisement
Table of Contents
