Power Cisco Cius Through The Power Port; Power Cisco Cius Through Poe; Launch The Phone Application; Answer A Call - Cisco Cius User Manual

Power Cisco Cius Through the Power Port

1. Insert the power cable into the HD media station AC power wall plug.
2. Connect your Cius to the media station.

Power Cisco Cius Through PoE+

1. Insert one end of an Ethernet cable into the media station network port.
2. Insert the other end of the Ethernet cable into an Ethernet port on a PoE+ enabled Ethernet switch.
3. Connect your Cius to the media station.

Launch the Phone Application

Lift the handset or press the Speaker button to launch the Phone application.
Related Topic
Phone, page 24
•

Answer a Call

Lift the handset or press the Speaker button to answer a call.

Docking and Undocking During a Call

The Phone application preserves your calls when you dock or undock your Cius with an HD media
station. There is a slight delay before the call audio is reestablished.

Start a Speakerphone Call

1. Press the Speaker button.
2. Enter the phone number or select a contact.
3. Tap Call.

Switch to a Speakerphone Call

With the handset off the hook, press the Speaker button to switch to a speakerphone call.
To switch back to a handset call, place the handset on hook and lift the handset again.
104 OL-24484-01