Using The Cisco Portable Tablet As A Tabletop Device - Cisco Smart+Connected Reference Manual

Portable or Tabletop Installation Options
Figure 1-7
Note •
•
Insert the Cisco Portable Tablet into its docking station.
Step 3
Wake up the Cisco Portable Tablet by touching the screen or pressing any button.
Step 4

Using the Cisco Portable Tablet as a Tabletop Device

Procedure
Place the docking station on a flat surface.
Step 1
Power the device using either a power cable or a Power over Ethernet (PoE) connection.
Step 2
a.
b.
c.
Cisco Smart+Connected Portable Tablet Reference Guide
10
Back View with Power Connections
If you use Ethernet and undock the Cisco Portable Tablet, you will lose connectivity.
The power cord angles to the right and is held by the retaining clip. When you insert the power cord,
it also snaps into the retaining clip.
Insert the power cable into the power jack slot on the back of the device (see
Plug the power cord into a wall outlet.
To use Ethernet, plug the RJ-45 connector into the PoE connector (such as a Cisco SF302-08P
Switch) and then into the Ethernet jack on the back of the docking station (see
Figure 1-7).
Figure 1-7).
OL-27364-01