Mac Access Control List Commands - D-Link DWS-4000 Series Cli Command Reference

The following information is repeated for each interface and direction (only those interfaces configured with an attached
policy are shown):
Term Definition
Interface Valid slot and port number separated by a forward slash.
Operational Status The current operational status of this DiffServ service interface.
Policy Name The name of the policy attached to the interface.
MAC A C
CCESS
This section describes the commands you use to configure MAC Access Control List (ACL) settings. MAC ACLs ensure that
only authorized users have access to specific resources and block any unwarranted attempts to reach network resources.
The following rules apply to MAC ACLs:
• The maximum number of ACLs you can create is 100. The limit applies to all ACLs, regardless of type.
• The system supports only Ethernet II frame types.
• The maximum number of rules per MAC ACL is 12.
• If you configure an IP ACL on an interface, you cannot configure a MAC ACL on the same interface.
mac access-list extended
This command creates a MAC Access Control List (ACL) identified by <name>, consisting of classification fields defined for
the Layer 2 header of an Ethernet frame. The <name> parameter is a case-sensitive alphanumeric string from 1 to 31
characters uniquely identifying the MAC access list.
If a MAC ACL by this name already exists, this command enters Mac-Access-List config mode to allow updating the existing
MAC ACL.
Note: The CLI mode changes to Mac-Access-List Config mode when you successfully execute this command.
Format
mac access-list extended <name>
Mode Global Config
no mac access-list extended
This command deletes a MAC ACL identified by <name> from the system.
Format
no mac access-list extended <name>
Mode Global Config
mac access-list extended rename
This command changes the name of a MAC Access Control List (ACL). The <name> parameter is the name of an existing
MAC ACL. The <newname> parameter is a case-sensitive alphanumeric string from 1 to 31 characters uniquely identifying
the MAC access list.
L C
ONTROL IST OMMANDS

MAC Access Control List Commands

397