Unified Switch Channel And Power Commands - D-Link DWS-4000 Series Cli Command Reference

U S
NIFIED WITCH
The commands in this section provide status and configuration for automatic channel planning and power adjustment.
channel-plan mode
This command configures the channel plan mode for each 802.11a/n and 802.11b/g/n frequency band. If it is <interval>,
a channel plan is computed and applied at every defined interval. If it is <manual>, you must start and apply the channel
plan manually. If it is <time>, then the channel plan will be computed and applied at the scheduled time.
Default manual
Format
channel-plan {an | bgn} mode {interval | manual | time}
Mode Wireless Config
Parameter Description
an Configure channel plan mode for 802.11a/n.
bgn Configure channel plan mode for 802.11b/g/n.
interval Compute and apply new channel plans at the configured interval.
manual Compute and apply new channel plans only when requested via the UI.
time Compute and apply a new channel plan at the configured time.
channel-plan interval
This command configures the channel plan interval for each 802.11a/n and 802.11b/g frequency band. When the
corresponding channel plan mode is configured for interval, this parameter indicates how often new channel plans are
computed and applied.
Default 6
Format
channel-plan {an | bgn} interval <6-24>
Mode Wireless Config
Parameter Description
an Configure channel plan mode for 802.11a/n.
bgn Configure channel plan mode for 802.11b/g/n.
6-24 The channel plan interval in hours.
no channel-plan interval
The no version of this command returns the configured channel plan interval to the default.
Format
no channel-plan {an | bgn} interval
Mode Wireless Config
C P
HANNEL AND

Unified Switch Channel and Power Commands

C
OWER OMMANDS
227