Table of Contents
Advertisement
D-Link Unified Switch CLI Command Reference
no dhcp l2relay remote-id vlan
This parameter clears the DHCP Option-82 Remote ID for a VLAN and subscribed service (based on subscription-name).
Format
no dhcp l2relay remote-id vlan <vlan-range>
Mode
Global Config
dhcp l2relay trust
Use this command to configure an interface as trusted for Option-82 reception.
Default
untrusted
Format
dhcp l2relay trust
Mode
Interface Config
no dhcp l2relay trust
Use this command to configure an interface to the default untrusted for Option-82 reception.
Format
no dhcp l2relay trust
Mode
Interface Config
dhcp l2relay vlan
Use this command to enable the L2 DHCP Relay agent for a set of VLANs. All DHCP packets which arrive on interfaces in
the configured VLAN are subject to L2 Relay processing.
Default
disable
Format
dhcp l2relay vlan <vlan-range>
Mode
Global Config
no dhcp l2relay vlan
Use this command to disable the L2 DHCP Relay agent for a set of VLANs.
Format
no dhcp l2relay vlan <vlan-range>
Mode
Global Config
show dhcp l2relay all
This command displays the summary of DHCP L2 Relay configuration.
Format
show dhcp l2relay all
Mode
Privileged EXEC
© 2009 D-Link Corporation. All Rights Reserved
100
Advertisement
Table of Contents
