D-Link DWS-4000 Series Cli Command Reference page 515

Field Description
dnsname The DNS name of the server.
password The password in encrypted format.
Example: The following shows an example of the CLI command.
radius server key acct 10.240.4.10 encrypted <encrypt-string>
radius server msgauth
This command enables the message authenticator attribute to be used for the specified RADIUS Authenticating server.
Format
radius server msgauth <ipaddr|dnsname>
Mode Global Config
Field Description
ip addr The IP address of the server.
dnsname The DNS name of the server.
no radius server msgauth
The no version of this command disables the message authenticator attribute to be used for the specified RADIUS
Authenticating server.
Format
no radius server msgauth <ipaddr|dnsname>
Mode Global Config
radius server primary
This command specifies a configured server that should be the primary server in the group of servers which have the same
server name. Multiple primary servers can be configured for each number of servers that have the same name. When the
RADIUS client has to perform transactions with an authenticating RADIUS server of specified name, the client uses the
primary server that has the specified server name by default. If the RADIUS client fails to communicate with the primary
server for any reason, the client uses the backup servers configured with the same server name. These backup servers are
identified as the Secondary type.
Format
radius server primary {<ipaddr|dnsname>}
Mode Global Config
Field Description
ip addr The IP address of the RADIUS Authenticating server.
dnsname The DNS name of the server.
RADIUS Commands
507