D-Link DWS-4000 Series Cli Command Reference page 255

no client-qos enable
The no version of this command disables AP client QoS operation for the network. Client traffic is not subject to QoS
processing for any clients attached to this wireless network.
Format
no client-qos enable
Mode Network Config
deny-broadcast
This command enables deny broadcast mode for the network. This means the AP will not respond to client probe requests
broadcast to all available SSIDs.
Default Disable
Format
deny-broadcast
Mode Network Config
no deny-broadcast
The no version of this command disables deny broadcast mode for the network. This means the AP will respond to client
probe requests for all available SSIDs.
Format
no deny-broadcast
Mode Network Config
redirect mode
This command enables and configures the mode for redirection of wireless client traffic on this network. If HTTP redirection
is enabled, initial client requests are redirected to the configured URL.
Default None
Format
redirect mode {http | none}
Mode Network Config
no redirect mode
The no version of this command disables redirect on the network.
Format
no redirect mode
Mode Network Config
redirect url
This command configures a URL for HTTP redirection. When HTTP redirection is enabled on the network, each initial client
request is directed to this URL. Note that http:// is not entered in the configured URL because this prefix is assumed.
Wireless Network Commands
247