D-Link DWS-4000 Series Cli Command Reference page 24

D-Link Unified Switch CLI Command Reference
shutdown all
This command disables all ports.
Note: You can use the shutdown all command on physical and port-channel (LAG) interfaces, but not on
VLAN routing interfaces.
Default enabled
Format
shutdown all
Mode Global Config
no shutdown all
This command enables all ports.
Format
no shutdown all
Mode Global Config
speed
This command sets the speed and duplex setting for the interface.
Format
speed {<100 | 10> <half-duplex | full-duplex>}
Mode Interface Config
Acceptable Values Definition
100h 100BASE-T half duplex
100f 100BASE-T full duplex
10h 10BASE-T half duplex
10f 10BASE-T full duplex
speed all
This command sets the speed and duplex setting for all interfaces.
Format
speed all {<100 | 10> <half-duplex | full-duplex>}
Mode Global Config
Acceptable Values Definition
100h 100BASE-T half duplex
100f 100BASE-T full duplex
10h 10BASE-T half duplex
10f 10BASE-T full duplex
© 2009 D-Link Corporation. All Rights Reserved
16